INITIAL AIRWORTHINESS classroom

NDT methods, regulation & requirements (EN 4179) - Part 145/21 Organisation

Locations & Dates
JAA TO Schiphol-Rijk Netherlands
Dates not yet confirmed
JAA TO Virtual
Dates not yet confirmed
Show allShow less
€ 1290.00

Enter your e-mail address in order to receive an automatic notification when the registrations open.

Introduction

This is a 2-day training course of the basics of how to establish an acceptable NDT department.

The course is intended to provide first-hand information on the application and implementation of NDT techniques, the administration and management of training and recurrent trainings to organisation, management and personnel of Maintenance and Design Organisations. It will promote best practice and drawing on the guidance contained in international standards and other aviation regulations and publications.

Course Content

The course topics are selected to provide guidance for NDT methods, regulation and requirements in accordance with the regulation for EASA Part 145 and Part 21 Organizations:

  • Overview of the classic NDT Methods
  • Strength and weakness of each method
  • NDT Requirements in EU 1321/2014.
  • NDT Requirements in Part 21 Organizations EU 748/2012
  • Regulation EN4179
    • Structure of EN 4179
    • National NDT Board
    • Employers Written Practice
    • Requirements to become an NDT Inspector
    • Levels of Qualification
  • Flow charts discussion for initial Certification and Re-Certification of all Levels
  • Conclusions

Learning Objectives

After training, the person is able to differentiate between different methods of NDT and their specific strengths and weaknesses. He/she will also be able to interpret the applicable requirements for NDT certification of personnel and what levels of qualification are needed for a specified task.

The objectives of the course are to satisfy the needs of basic NDT requirements published by EU and EASA.

Who should take this course

This training is targeted at persons performing, managing or specifying NDT techniques for initial or continued airworthiness of complete aircraft or components thereof. 

Pre-requisites

Attendees should have a basic technical understanding in NDT techniques or are in management positions and responsible for NDT personnel.

Duration

2 days, starting at 09.00 and finishing at approx 17.00.

Locations & Dates
JAA TO Schiphol-Rijk Netherlands
Dates not yet confirmed
JAA TO Virtual
Dates not yet confirmed
€ 1290.00

Enter your e-mail address in order to receive an automatic notification when the registrations open.